Benefits of being our customer?
You will have access to our cold room configurator and can design it according to your needs with all its accessories, including modular shelves, in just a few clicks and a few minutes.
OPTIMA is the new concept of a mini cold room, specially designed to meet the most demanding storage and refrigeration needs of hotels, restaurants, catering companies, shops, and kitchens.
The goal of OPTIMA is to provide all facilities with the possibility of having an efficient, high-quality cold room with a unique and innovative design, even in small spaces. With Optima, you not only innovate in its installation but also improve and simplify the work for both installers and end customers. It is equipped with innovative features that make assembly easier and faster.
Thanks to its modular design, different thicknesses, sizes, and customization options, OPTIMA evolves with your business, adapting to the changes it requires.
Up to 2,600 mm
Modular - 200 in 200 mm
-40°C to 15°C
LED
General Specifications of Optima Panels:
Optima Panel Coating:
Galvanized steel sheet, pre-lacquered with 25-micron polyester lacquer. Thickness 0.5 mm, with a protective film.
Exterior Coating Options:
Characteristics of Optima Without Floor (Optima 85mm – Positive):
Optima with Floor Features (Optima 85mm, 105mm, and 120mm – Positive and Negative):
For positive (storage) and negative (freezing) temperatures in 4 external heights: 2m (except for 120mm); 2.2m; 2.4m, and 2.6m.
REINFORCED PHENOLIC FLOOR PANEL:
This floor panel is recommended for conventional service loads. It is made of 9mm plywood (CTBX), coated with a non-slip brown phenolic resin. The material used in the factory is Finnish birch wood.
REINFORCED STAINLESS STEEL FLOOR PANEL:
9mm plywood (CTBX), coated with a non-slip stainless steel sheet. The exterior finish is smooth with a pre-coated galvanized steel sheet, coated with a 25-micron polyester varnish, reference 1006, and a thickness of 0.50mm with a polyethylene protective film.
SUPER REINFORCED FLOOR PANEL (PHENOLIC AND STAINLESS STEEL):
These floor panels are developed for heavier and more demanding service loads. They are made with a reinforcement of 0.6mm pre-lacquered galvanized sheet, with 9mm plywood (CTBX), coated with brown non-slip phenolic resin, Finnish birch wood, or covered with a 0.6mm stainless steel sheet.
SUPER REINFORCED ALUMINUM FLOOR PANEL:
This is a two-layer floor made with a 6mm thick wood base and a 3mm thick non-slip aluminum surface with a checkered pattern. Due to its design, composition, and features, using this floor will provide your OPTIMA cold room with maximum security and strength without compromising on the best design and appearance.
Choose from different standard pivot door sizes, with the option to adjust the door leaf within the panel to fit the installation requirements.
You can also opt for a sliding door, which features a new model with an easy and quick-to-install guide, thanks to its clip-on assembly.
Among our new offerings, discover our automatic semi-flush door with opening sensors, facilitating access to the chamber, and a flush peephole. Additionally, our glass door for positive temperatures is equipped with an integrated temperature and humidity controller, along with an interactive touch sensor that allows you to adjust the interior lighting intensity.
INCLUDED ACCESSORIES:
• Sanitary profile around the entire perimeter of the cold room.
• Balance valve for negative chambers.
OPTIONAL ACCESSORIES COLDKIT OPTIMA:
With Coldkit, you can complete and customize your OPTIMA cold room with the following options:
• Replace a pivot door with a sliding door.
• Add a pivot door or a sliding door.
• Divide your OPTIMA cold room with a partition wall and add doors.
• Add LED lighting around the entire perimeter of the sanitary profile of the cold storage minimal energy consumption, easy to clean, and prevents dirt accumulation on the lamps.
Advantages of being our customer?
You will have access to our cold room configurator, allowing you to design it according to your needs, with all your accessories, including modular shelves, in just a few clicks and within minutes.
See everything you can do.
You will have access to our cold room configurator and can design it according to your needs with all its accessories, including modular shelves, in just a few clicks and a few minutes.
For technical specifications, measurements, and prices, contact us, and we’ll send you more information.
Complete your Coldkit refrigeration cold room with our modular shelves. The perfect storage solution with food safety certifications.
